Ultimate Guide to Prepare NS0-184 with Accurate PDF Questions [Feb 22, 2022]
Pass Network Appliance With ActualPDF Exam Dumps
NEW QUESTION 34
In ONTAP 9.7 software, how many different replicated databases (RDBs) exist per node?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 35
You must replace a FAS2750 switchless cluster with an AFF A220 switchless cluster for a customer. The customer requires that you transfer the data from the FAS2750 cluster to the AFF A220.
In this scenario, which two methods would you use to migrate the customer's data? (Choose two.)
- A. Establish an SVM-DR relationship between the two clusters and activate the destination SVM.
- B. Install SAS cables between the two clusters and use the vol move command.
- C. Remove all of the HDD drives from the FAS cluster and install them into the AFF cluster.
- D. Provide cluster switches and build a 4-node cluster, then use the vol move command.
Answer: B,D
NEW QUESTION 36
Click the Exhibit button.
You plan to install a new ONTAP cluster at a customer site by using the new ONTAP System Manager 9.7 GUI.
Referring to the exhibit, what must you do before you provision initial storage?
- A. Configure a remote tier.
- B. Configure protocols.
- C. Configure aggregates.
- D. Configure cluster LIFs.
Answer: C
NEW QUESTION 37
After completing a technology refresh, you need to schedule a knowledge transfer with a customer. The customer asks you to address a number of topics during the meeting.
In this scenario, which two topics would be appropriate to address? (Choose two.)
- A. performing database application data migrations
- B. registering for access to the NetApp Support site
- C. accessing internal NetApp KB articles
- D. logging the customer support calls
Answer: A,B
NEW QUESTION 38
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)
- A. FlexClone volumes
- B. thin provisioning
- C. FlashCache
- D. Flash Pool
Answer: C,D
NEW QUESTION 39
In an ONTAP 9.7 cluster, which LIF role is used for sending AutoSupport, establishing Network Time Protocol (NTP), and loading software updates?
- A. cluster management LIF
- B. cluster LIF
- C. node management LIF
- D. data LIF
Answer: C
NEW QUESTION 40
Click the Exhibit button.
You are installing a new FAS cluster. The management network must be on tagged VLAN 11 for remote administration by a service provider.
Referring to the exhibit, which two ports will allow service provider access to both cluster and node management LIFs? (Choose two.)
- A. e0b-11
- B. e0M-11
- C. e0a-11
- D. e0M
Answer: B,D
NEW QUESTION 41
Click the Exhibit button.
You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.
For a high availability, which ports should swap Ethernet cables?
- A. Swap node2:e4a and node2:e8a.
- B. Swap node1:e8a and node2:e4a.
- C. Swap node1:e4a and node2:e4b.
- D. Swap node1:e4a and node1:e8a.
Answer: A
NEW QUESTION 42
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
- A. IPspaces
- B. broadcast domains
- C. routing
- D. BGP
Answer: B
NEW QUESTION 43
Before starting a base installation on an AFF A400, you need to find out the default cluster interconnect ports for the AFF A400 controllers.
In this scenario, which three resources would you use to find this information? (Choose three.)
- A. AFF FAS Documentation Center
- B. Active IQ Unified Manager
- C. Interoperability Matrix Tool (IMT)
- D. hardware installation setup poster
- E. Hardware Universe (HWU)
Answer: A,D,E
NEW QUESTION 44
You want to verify that connections are cables correctly and that shelf IDs are unique within an HA pair.
Which tool would be used to accomplish these tasks?
- A. Active IQ Config Advisor
- B. Cloud Insights
- C. System Diagnostics
- D. Active IQ Unified Manager
Answer: C
NEW QUESTION 45
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure a trap host on the cluster.
- B. Configure a firewall policy and allow SNMP.
- C. Configure DNS on the cluster.
- D. Configure an SNMP community string on the cluster.
Answer: A,C
NEW QUESTION 46
You need to install a cluster with a FAS2720 HA pair and a FAS8300 HA pair.
Which NetApp tool will verify which cluster interconnect switches support this configuration?
- A. Active IQ Config Advisor
- B. mysupport.netapp.com site
- C. Interoperability Matrix Tool (IMT)
- D. Hardware Universe (HWU)
Answer: D
NEW QUESTION 47
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?
- A. A capacity license is required.
- B. No license is required.
- C. A site license is required.
- D. A subscription license is required.
Answer: A
NEW QUESTION 48
You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center.
In this scenario, which cluster configuration is allowed with ASA controllers?
- A. ASA controllers can only be added to clusters that have existing SAN licenses.
- B. Add the ASA controllers to an existing 4-node cluster with NAS licenses.
- C. Add the ASA controllers to an existing 10-node cluster.
- D. ASA controllers can only be installed as a standalone HA pair.
Answer: A
NEW QUESTION 49
Click the Exhibit button.
As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
- A. cluster LIFs
- B. private network
- C. management LIFs
- D. client network
Answer: A,B
NEW QUESTION 50
You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.
Which action must be performed to ensure that the customer's requests are satisfied?
- A. Assign all data LIFs to Node 1.
- B. Perform a takeover of Node 2 to ensure that it does not run.
- C. Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.
- D. Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.
Answer: A
NEW QUESTION 51
......
Latest NS0-184 Exam Dumps - Valid and Updated Dumps: https://testinsides.actualpdf.com/NS0-184-real-questions.html
