Dumps for Free Network Appliance NS0-184 Practice Exam Questions [Oct 27, 2024]
NS0-184 Dumps PDF And Certification Training
The NetApp Certified Storage Installation Engineer, ONTAP certification is a valuable certification for professionals working in the storage industry. NetApp Certified Storage Installation Engineer, ONTAP certification validates the candidate's skills and knowledge in installing, configuring, and maintaining NetApp ONTAP storage solutions. It also demonstrates the candidate's commitment to ongoing professional development and their dedication to staying up-to-date with the latest industry trends and technologies.
The NS0-184 exam is intended for individuals who have experience in the installation and configuration of NetApp storage systems. NS0-184 exam consists of 60 multiple-choice questions and is divided into two sections. The first section covers the installation and configuration of NetApp storage systems, while the second section focuses on troubleshooting and maintenance of these systems. NS0-184 exam is designed to test the candidate's technical skills and knowledge in these areas.
NEW QUESTION # 19
You have a 2-node FAS8300 ONTAP 9.8 cluster that serves SMB shares. You are configuring interface groups for higher performance and resiliency.
Which two NetApp best practices should you follow to satisfy these performance and resiliency requirements? (Choose two.)
- A. Use ports with different chipsets.
- B. Use ports with the same chipsets.
- C. Use ports from the same NICs.
- D. Use ports from different NICs.
Answer: B,D
NEW QUESTION # 20
You have a new 2-node FAS8700 ONTAP 9.8 cluster. One of the nodes has 24x16 TB NL-SAS disks assigned and available for a new aggregate. You created the aggregate with one RAID group and two spare disks.
In this scenario, how many data drives are in the aggregate?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 21
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF A300 HA pair with two DS224C shelves with 3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?
- A. Add the shelf to the existing stack.
- B. Create a new stack on the HA pair to add the shelf.
- C. License NSE and add the shelf to this HA pair as a new stack.
- D. Connect the shelf to an HA pair with NSE drives.
Answer: A
NEW QUESTION # 22
Click the Exhibit button.
A customer has two Cisco 40GbE data switches. They want to connect the switches to an AFF A400 HA pair. The switches and the AFF A400 are approximately seven meters apart.
Referring to the exhibit, which two supported actions would allow you to accomplish this task? (Choose two.)
- A. Change the requirement for Ethernet cables.
- B. Install 10 meter NetApp supported copper cables.
- C. Change the requirement for optical cables.
- D. Relocate the switches or the AFF A400 so that the distance is less than five meters.
Answer: A,B
NEW QUESTION # 23
While installing a new AFF A400 HA pair, you are unable to add an NTP server from another subnet. You are able to ping the NTP server from the new cluster.
In this scenario, what are two causes of this problem? (Choose two.)
- A. The cluster management LIF needs to be in a different IPspace.
- B. The time skew is too great.
- C. The admin SVM has the wrong gateway.
- D. A firewall is blocking port 123.
Answer: A,C
NEW QUESTION # 24
After completing the installation of an AFF A800 ONTAP AI cluster, you are asked which contacts are available for additional help in obtaining immediate assistance in solving P1 issues.
In this scenario, what do you tell the customer?
- A. Use the NetApp KB TV channel.
- B. Contact NetApp Support using chat.
- C. Contact NetApp Support by telephone.
- D. Use Guided Problem Solving.
Answer: C
NEW QUESTION # 25
Click the Exhibit button.
You want to add an AFF A400 system to an existing 4-node cluster.
Referring to the exhibit, which number points to the ports that are used to cable the new nodes to the cluster interconnect switches.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 26
You are installing a new AFF A400 cluster and need to access the cluster management LIF from a remote subnet with the fully qualified domain name (FQDN) a400.lab.netapp.com.
In this scenario, which two network components must be configured to log in to ONTAP System Manager from the remote subnet? (Choose two.)
- A. DNS
- B. NTP
- C. VLAN
- D. route
Answer: A,D
NEW QUESTION # 27
You are installing an AFF A700 system with two disk shelves using ADPv2. After setting up the cluster, you realize that one drive shelf was powered off and that the drives have not been assigned to any of the nodes.
In this scenario, which two resources will help you find a solution? (Choose two.)
- A. Active IQ Digital Advisor
- B. NetApp Documentation Center
- C. NetApp Knowledge Base
- D. Active IQ Config Advisor
Answer: C,D
NEW QUESTION # 28
What should you do to change the data protocol of a LIF?
- A. Delete and re-recreate the LIF.
- B. Shut down the assigned port.
- C. Add the new data protocol to the LIF.
- D. Put the LIF in another broadcast domain.
Answer: A
NEW QUESTION # 29
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure a firewall policy and allow SNMP.
- B. Configure a trap host on the cluster.
- C. Configure an SNMP community string on the cluster.
- D. Configure DNS on the cluster.
Answer: B,D
NEW QUESTION # 30
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?
- A. A site license is required.
- B. No license is required.
- C. A capacity license is required.
- D. A subscription license is required.
Answer: C
NEW QUESTION # 31
You are preparing to physically install a new AFF A400 cluster into a customer's racks. All equipment has been delivered to the customer's site.
Which three tools do you need to complete this installation? (Choose three.)
- A. cable management tray
- B. laptop computer
- C. Phillips #2 screwdriver
- D. slide rail kit
- E. additional network cables
Answer: B,C,E
NEW QUESTION # 32
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)
- A. Use a USB drive with the new software image and let ONTAP automatically boot.
- B. Use ONTAP System Manager to download and install the new software image.
- C. Use ONTAP System Manager to upload and install the new software image.
- D. Use the cluster image package get and cluster image update commands.
Answer: B,D
NEW QUESTION # 33
You want to use the NetAppDocs tool to collect information on a newly configured ONTAP 9.8 cluster and to generate a Word document with the details of the cluster configuration.
Which two data sources would you use to collect the necessary data? (Choose two.)
- A. ONTAP Cluster
- B. Active IQ Digital Advisor
- C. Active IQ Unified Manager
- D. AutoSupport packages
Answer: A,C
NEW QUESTION # 34
Click the Exhibit button.
You are setting up a new AFF A700 into a new rack at a customer's site. The customer asks you to plan for simplified future growth.
Referring to the exhibit, how would you satisfy this requirement?
- A. Option 2
- B. Option 3
- C. Option 1
- D. Option 4
Answer: A
NEW QUESTION # 35
On which type of network interfaces are the cluster interconnect LIFs created?
- A. on a UTA port shared with other LIFs
- B. on an FC or FCoE port
- C. on a physical port
- D. on an interface group
Answer: D
NEW QUESTION # 36
A customer is asked to install a new AFF ASA A700 system. During the installation, the customer asks if ONTAP 9.8 is supported with their host's OS version running Windows 2016.
In this scenario, which NetApp tool would verify supportability?
- A. Interoperability Matrix Tool
- B. Active IQ OneCollect
- C. Active IQ Unified Manager
- D. ONTAP System Manager
Answer: D
NEW QUESTION # 37
You are preparing to install a new 2-node AFF A250 system at a customer site with an existing cluster that uses NetApp CN1610 cluster interconnect switches.
In this scenario, what are two valid actions for this installation? (Choose two.)
- A. Add the new nodes to the existing cluster and switches.
- B. Create a new 2-node switchless cluster.
- C. Migrate the existing cluster to new switches and add the new nodes.
- D. Create a new 2-node switched cluster that uses the CN1610 cluster switches.
Answer: C,D
Explanation:
Reference:
https://kb.netapp.com/Advice_and_Troubleshooting/Flash_Storage/AFF_Series/Controller_Hardware_Upgrade3A_Adding_AFF_A250_nodes_to_existing_cluster_report_HA_interconnect_errors_and_c
annot_perform_takeover
NEW QUESTION # 38
A customer wants to enable SnapMirror Synchronous across their environment. The customer must ensure that SnapMirror Synchronous will work across the environment.
In this scenario, which two statements are true? (Choose two.)
- A. A SnapMirror license is required on both the source cluster and the destination cluster.
- B. A SnapMirror license is not required on both the source cluster and the destination cluster.
- C. A SnapMirror Synchronous license is required on both the source and destination clusters.
- D. A SnapMirror Synchronous license is required on the source cluster.
Answer: B,C
NEW QUESTION # 39
You installed two separate clusters in an isolated data center without outbound network access. The customer wants to troubleshoot issues locally and also create custom Excel reports for capacity utilization from a local server.
In this scenario, which NetApp tool would satisfy this requirement?
- A. Cloud Insights
- B. ONTAP System Manager
- C. Active IQ Digital Advisor
- D. Active IQ Unified Manager
Answer: D
NEW QUESTION # 40
Click the Exhibit button.
A customer wants to replace their ONTAP cluster CN1610 switches with Cisco Nexus 3132Q-V switches. They want to perform a non-disruptive upgrade.
Referring to the exhibit, which cable will be required to non-disruptively migrate to the new switches?
- A. a 40GbE QSFP+ to QSFP+ cable
- B. a 10GbE SFP+ to SFP+ cable
- C. a 100GbE QSFP28+ to 4x25GbE SFP28+ cable
- D. a 40GbE QSFP+ to 4x10GbE SFP+ cable
Answer: C
NEW QUESTION # 41
......
Network Appliance NS0-184 (NetApp Certified Storage Installation Engineer, ONTAP) Certification Exam is a highly sought-after certification that is designed for storage installation engineers. NetApp Certified Storage Installation Engineer, ONTAP certification exam is designed to test the knowledge and skills required to install and configure NetApp storage systems, including ONTAP.
Check your preparation for Network Appliance NS0-184 On-Demand Exam: https://testinsides.actualpdf.com/NS0-184-real-questions.html
