Updated Mar 05, 2024 Test Engine to Practice Test for GB0-191-ENU Valid and Updated Dumps
Exam Questions for GB0-191-ENU Updated Versions With Test Engine
H3C GB0-191-ENU certification exam is a globally recognized certification that demonstrates your proficiency in constructing small and medium-sized enterprise networks. It is an industry-standard certification that has been designed to meet the requirements of the modern workforce, and it's ideal for professionals who want to stay up-to-date with the latest technologies and trends.
The Constructing Small - and Medium - Sized Enterprise Network certification exam covers a range of topics, including network design principles, network security, routing and switching, and network management. Candidates will be tested on their ability to design, implement, and manage networks that can support the needs of small and medium-sized enterprises. GB0-191-ENU exam is also designed to test the candidate's knowledge of industry best practices and standards.
NEW QUESTION # 242
The router discovery function in IPv6 Neighbor Discovery Protocol refers to ______.
- A. The host discovers the IPv6 address of the router in the network
- B. The router discovers the IPv6 address of the host in the network
- C. The router discovers the prefix and other configuration parameters of the host in the network
- D. The host discovers the prefix and other configuration parameters of the router and its network
Answer: D
NEW QUESTION # 243
To view the comprehensive information of the routing table on the MSR router, such as the total number of routes, the number of RIP routes, the number of OSPF routes, the number of active routes, etc., which of the following commands can be used?
- A. [MSR-GigabitEthernet0/0]display ip routing-table statistics
- B. <MSR>display ip routing-table statistics
- C. [MSR] display ip routing-table
- D. [MSR] display ip routing-table accounting
Answer: A,B
NEW QUESTION # 244
Which of the following statements about IP addresses are correct is ______. (Multiple choice)
- A. The IP address can be solidified in the hardware and is a unique MAC
- B. IP address is usually expressed in dotted hexadecimal notation, for example: 10.110.192.111
- C. IP addresses are divided into five categories: A, B, C, D, E
- D. IP address is composed of 32 binary bits
Answer: C,D
NEW QUESTION # 245
The IP address 10.0.10.32 and the mask 255.255.255.224 represent a ______.
- A. Network address
- B. Broadcast address
- C. host address
- D. None of the above
Answer: A
NEW QUESTION # 246
TCP belongs to the ______ of the OSI reference model.
- A. Presentation layer
- B. Session layer
- C. Transport layer
- D. Network layer
Answer: C
NEW QUESTION # 247
After opening the console to monitor system information, use the ______ command to turn on the screen output of debugging information.
- A. terminal information
- B. terminal debugging
- C. terminal screen
- D. terminal monitor
Answer: B
NEW QUESTION # 248
Two empty-configured MSR routers MSR-1 and MSR-2 are interconnected back-to-back through their respective S1/0 interfaces, and their respective GigabitEthernet0/0 interfaces
Connect the client hosts HostA and HostB respectively:
HostA----GE0/0--MSR-1--S1/0---------S1/0--MSR-2--GE0/0----HostB
Then make the following configuration on the two routers:
Configuration on MSR-1:
[MSR-1]interface GigabitEthernet 0/0
[MSR-1-GigabitEthernet0/0]ip add 192.168.1.1 24
[MSR-1]interface Serial 1/0
[MSR-1-Serial1/0]ip address 30.3.3.1 30
[MSR-1]rip
[MSR-1-rip-1]network 0.0.0.0
Configuration on MSR-2:
[MSR-2]interface GigabitEthernet 0/0
[MSR-2-GigabitEthernet0/0] ip address 10.10.10.1 24
[MSR-2]interface Serial 1/0
[MSR-2-Serial1/0]ip address 30.3.3.2 30
[MSR-2]rip
[MSR-2-rip-1]network 10.10.10.0
[MSR-2-rip-1]network 30.3.3.1
According to the above configuration, the WAN interface between the two routers can communicate with each other, other physical links in the network are good, and the two hosts HostA,
HostB can ping the address of their gateway GigabitEthernet0/0, so the following statement is correct _____.
- A. There is no RIP route in the routing table of MSR-2
- B. The command network 0.0.0.0 on MSR-1 is configured incorrectly, and the specific network segment should be configured
- C. The above three items are all wrong, the two routers can learn RIP routing
- D. The command network 30.3.3.1 on MSR-2 is configured incorrectly, it should be network 30.3.3.2
Answer: C
NEW QUESTION # 249
The functions implemented by the IPv6 Neighbor Discovery Protocol include _____. (Multiple choice)
- A. Router discovery
- B. Duplicate address detection
- C. Automatic address configuration
- D. Establish a Master/Slave relationship
- E. Address resolution
Answer: A,B,C,E
NEW QUESTION # 250
The MAC address table on a layer 2 switch is shown in the figure.
When the switch receives a broadcast frame from the E1/0/1 interface, it will ______ the frame. (Multiple choice)
- A. send out from all interfaces on the switch
- B. Send out from the E1/0/3 interface
- C. send out from E1/0/4 interface
- D. Send out from the E1/0/2 interface
- E. Send out from the E1/0/1 interface
- F. Discard directly
Answer: B,C,D
NEW QUESTION # 251
The IP address 203.108.2.110 is the ______ address.
- A. Type B
- B. Type C
- C. Class D
- D. Type A
Answer: B
NEW QUESTION # 252
Xiao L is a senior IP network expert, determined to develop a new dynamic routing protocol. Which of the following should be included in the working process of a routing protocol? (multiple choice) (multiple choice)
- A. Maintain and update routing
- B. Found neighbors
- C. Switch routing
- D. Calculate route
Answer: A,B,C,D
NEW QUESTION # 253
Xiao L is a senior network technical engineer. He wants to design a relatively perfect IGP routing protocol independently. He hopes that the routing protocol has a great improvement in Cost. Then, when designing the cost of the routing protocol, which of the following factors should be considered? (Multiple choice)
- A. Link MTU
- B. Link delay
- C. Link bandwidth
- D. Link reliability
Answer: A,B,C,D
NEW QUESTION # 254
The following ACL is configured on the MSR router:
acl number 3999
rule permit tcp source 10.10.10.1 255.255.255.255 destination 20.20.20.1 0.0.0.0 time-range lucky
Then the correct understanding of the ACL is _______. (Multiple choice)
- A. The rule can match TCP packets from any source network segment
- B. This rule only matches packets destined for 20.20.20.1
- C. This rule only matches data packets originating from 10.10.10.1
- D. The rule only takes effect during the lucky time period
- E. The rule can match TCP packets to any destination network segment
Answer: A,B,D
NEW QUESTION # 255
In the following statement about Easy IP, the error is ______.
- A. No need to configure NAT address pool when configuring Easy IP
- B. When configuring Easy IP, there is no need to configure ACL to match the packets that need to be translated by NAT
- C. Easy IP is suitable for NAT device dialing or dynamically obtaining public network IP address
- D. Easy IP is a special case of NAPT
Answer: B
NEW QUESTION # 256
The WAN interface S0/0 of the customer's two routers MSR-1 and MSR-2 uses the PPP protocol, and the routers learn the routes from each other by configuring RIP. The following configuration is available on MSR-1: rip 1 network 0.0.0.0 import -route static # ip route-static 0.0.0.0 0.0.0.0 Serial0/0 Then the wrong explanation about this configuration is ______.
- A. RIP imports the statically configured default route and advertises it to MSR-2
- B. Through the above configuration, MSR-1 will not dynamically advertise the default route to the peer through RIP
- C. By configuring MSR-1 as above, the default route can be dynamically advertised to the peer through RIP
- D. RIP 1 in the configuration means that the configured RIP version is V1
Answer: A,B
NEW QUESTION # 257
......
H3C GB0-191-ENU (Constructing Small - and Medium - Sized Enterprise Network) Certification Exam is a globally recognized certification exam that focuses on the construction and maintenance of small to medium-sized enterprise networks. GB0-191-ENU exam is designed for individuals who are seeking to enhance their knowledge and skills in network design, installation, and maintenance. Constructing Small - and Medium - Sized Enterprise Network certification is particularly beneficial for network engineers, IT managers, and other professionals who work in the field of network infrastructure.
GB0-191-ENU Exam Dumps - Free Demo & 365 Day Updates: https://testinsides.actualpdf.com/GB0-191-ENU-real-questions.html
