The New NCP-US-6.5 2024 Updated Verified Study Guides & Best Courses
Authentic NCP-US-6.5 Exam Dumps PDF - 2024 Updated
NEW QUESTION # 30
An administrator ha having difficulty enabling Data Lens for a file server.
What is the most likely cause of this issue?
- A. SSR is enabled on the file server.
- B. The file server has been cloned.
- C. The file server is in a Protection Domain.
- D. The file server has blacklisted file types.
Answer: B
Explanation:
The most likely cause of this issue is that the file server has been cloned. Cloning a file server is not a supported operation and can cause various problems, such as Data Lens not being able to enable or disable for the cloned file server. To avoid this issue, the administrator should use the scale-out feature to add more FSVMs to an existing file server, or create a new file server from scratch. Reference: Nutanix Files Administration Guide, page 28; Nutanix Files Troubleshooting Guide, page 11
NEW QUESTION # 31
Which user is authorized to deploy File Analytics?
- A. AD user mapped to a Prism admin role
- B. Prism Element administrator
- C. AD user mapped to a Cluster admin role
- D. Prism Central administrator
Answer: D
Explanation:
The user that is authorized to deploy File Analytics is Prism Central administrator. Prism Central is a web-based user interface that allows administrators to manage multiple Nutanix clusters and services, including Files and File Analytics. Prism Central administrator is a user role that has full access and control over all Prism Central features and functions. To deploy File Analytics, the user must log in to Prism Central as a Prism Central administrator and follow the steps in the File Analytics Deployment wizard. Reference: Nutanix Files Administration Guide, page 93; Nutanix File Analytics Deployment Guide
NEW QUESTION # 32
An administrator has performed an AOS upgrade, but noticed that the compression on containers is not happening.
What is the delay before compression begins on the Files container?
- A. 30 minutes
- B. 12 hours
- C. 60 minutes
- D. 24 hours
Answer: B
Explanation:
The delay before compression begins on the Files container is 12 hours. Compression is a feature that reduces the storage space required for data by applying an algorithm that eliminates redundant or unnecessary bits. Compression can improve the storage efficiency and performance of Files. Compression is enabled by default on the Files container and runs in the background as a low-priority task. Compression does not start immediately after an AOS upgrade, but waits for 12 hours to avoid interfering with other high-priority tasks or operations. Reference: Nutanix Files Administration Guide, page 24; Nutanix Files Solution Guide, page 10
NEW QUESTION # 33
An administrator is planning to upgrade all ESXi hypervisors in a cluster hosting Files.
When performing one-click hypervisor upgrades, what prerequisite must be performed?
- A. Disable the anti-affinity rules on all FSVMs.
- B. Manually migrate the FSVMs.
- C. Enable the anti-affinity rules on all FSVMs.
- D. Shutdown the FSVMs.
Answer: A
Explanation:
The prerequisite that must be performed before performing one-click hypervisor upgrades is to disable the anti-affinity rules on all FSVMs. Anti-affinity rules are rules that prevent two or more VMs from running on the same host at the same time. Anti-affinity rules can improve the availability and performance of FSVMs by distributing them across different hosts in a cluster. However, anti-affinity rules can interfere with one-click hypervisor upgrades, which require all VMs on a host to be migrated to another host before upgrading the host. Therefore, the administrator must disable the anti-affinity rules on all FSVMs before performing one-click hypervisor upgrades, and re-enable them after the upgrades are completed. Reference: Nutanix Files Administration Guide, page 22; Nutanix Files Upgrade Guide
NEW QUESTION # 34
Immediately after creation, the administrator is asked to change the name of Objects store.
How will the administrator achieve this request?
- A. Delete and recreate a new Objects store with the updated name.
- B. Update the name of the Objects stores by using a CORS XML file
- C. The Objects store can only be renamed if hosted on ESXi.
- D. Enable versioning and then rename the Objects store, disable versioning
Answer: A
Explanation:
The administrator can achieve this request by deleting and recreating a new Objects store with the updated name. Objects is a feature that allows users to create and manage object storage clusters on a Nutanix cluster. Objects clusters can provide S3-compatible access to buckets and objects for various applications and users. Objects clusters can be created and configured in Prism Central. However, once an Objects cluster is created, its name cannot be changed or edited. Therefore, the only way to change the name of an Objects cluster is to delete the existing cluster and create a new cluster with the updated name. Reference: Nutanix Objects User Guide, page 9; Nutanix Objects Solution Guide, page 8
NEW QUESTION # 35
Which error logs should the administrator be reviewing to determine why the relates service is down?
- A. Cerebro.ERROR
- B. Tcpkill.log
- C. Solver.log
- D. Arithmos.ERROR
Answer: A
Explanation:
The error log that the administrator should review to determine why the relay service is down is Cerebro.ERROR. Cerebro is a service that runs on each FSVM and provides relay functionality for Data Lens. Relay service is responsible for collecting metadata and statistics from FSVMs and sending them to Data Lens via HTTPS. If Cerebro.ERROR log shows any errors or exceptions related to relay service, it can indicate that relay service is down or not functioning properly. Reference: Nutanix Files Administration Guide, page 23; Nutanix Data Lens User Guide
NEW QUESTION # 36
What best describes the data protection illustrated in the exhibit?
- A. Metro Availability
- B. NearSync
- C. Availability Zones
- D. Smart DR
Answer: D
Explanation:
The data protection illustrated in the exhibit is Smart DR. Smart DR is a feature that allows share-level replication between active file server instances for disaster recovery. Smart DR can replicate shares from a primary FSI to one or more recovery FSIs on different clusters or sites. Smart DR can also perform failover and failback operations in case of a disaster or planned maintenance. The exhibit shows a Smart DR configuration with one primary FSI and two recovery FSIs. Reference: Nutanix Files Administration Guide, page 79; Nutanix Files Solution Guide, page 9
NEW QUESTION # 37
Which port is required between a CVM or Prism Central to insights,nutanix.com for Data Lens configuration?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Data Lens is a SaaS that provides file analytics and reporting, anomaly detection, audit trails, ransomware protection features, and tiering management for Nutanix Files. To configure Data Lens, one of the network requirements is to allow HTTPS (port 443) traffic between a CVM or Prism Central to insights.nutanix.com. This allows Data Lens to collect metadata and statistics from the FSVMs and display them in a graphical user interface. Reference: Nutanix Files Administration Guide, page 93; Nutanix Data Lens User Guide
NEW QUESTION # 38
Which two prerequisites are needed when deploying Objects to a Nutanix cluster? (Choose two.)
- A. DNS is configured on the PE.
- B. Data Services IP is configured on the PI
- C. Microsegmentation is enabled.
- D. AHV IPAM is disabled on the VLAN used for Objects.
Answer: B
Explanation:
Nutanix Objects requires a Data Services IP to be configured on the Prism Infrastructure (PI) cluster, which is used to expose the S3 API endpoint for accessing buckets and objects. Nutanix Objects also requires AHV IP Address Management (IPAM) to be disabled on the VLAN used for Objects, as Objects uses its own DHCP service to assign IP addresses to the Objects VMs1. Reference: Nutanix Objects Administration Guide1
NEW QUESTION # 39
What is the most efficient way of enabling users to restore their files without administrator intervention in multiple Files shares?
- A. Assign the same Category to all FSVMs and adding that Category to a single Protection Policy in PC.
- B. Click Enable Self Service Restore in the Edit wizard for each share in Shares tab from Files Console.
- C. Add all FSVMs to a Consistency Group within a single asynchronous Protection Domain in PE.
- D. Click Enable next to the name of the share in Manage Recovery Settings from Data Lens.
Answer: B
Explanation:
Nutanix Files allows users to restore their files from the snapshots taken by the protection policy. A protection policy is a set of rules that defines how often snapshots are taken, how long they are retained, and where they are replicated. A protection policy can be applied to one or more file shares. To enable users to restore their files without administrator intervention, the administrator must enable the Self Service Restore option for each share in the Files Console. This option adds a hidden folder named .snapshot in each share, which contains all the snapshots taken by the protection policy. Users can access this folder and browse the snapshots to find and restore their files. The administrator can also configure the permissions and quota for the .snapshot folder. Reference: Nutanix Files Administration Guide, page 75; Nutanix Files Self-Service Restore Guide
NEW QUESTION # 40
An organization currently has a Files cluster for their office data including all department shares. Most of the data is considered cold Data and they are looking to migrate to free up space for future growth or newer data.
The organization has recently added an additional node with more storage. In addition, the organization is using the Public Cloud for .. storage needs.
What will be the best way to achieve this requirement?
- A. Migrate cold data from the Files to tape storage.
- B. Enable Smart Tiering in Files within the File Console.
- C. Backup the data using a third-party software and replicate to the cloud.
- D. Setup another cluster and replicate the data with Protection Domain.
Answer: B
NEW QUESTION # 41
An administrator has deployed a new Files cluster within a Windows Environment.
After some days, he Files environment is not able to synchronize users with the Active Directory server anymore. The administrator observes a large time difference between the Files environment and the Active Directory Server that is responsible for the behavior.
How should the administrator prevent the Files environment and the AD Server from having such a time difference in future?
- A. Use 0.pool.ntp.org as the NTP Server for the Files environment.
- B. Connect to every FSVM and edit the time manually.
- C. Use 0.pool.ntp.org as the NTP Server for the AD Server.
- D. Use the same NTP Servers for the File environment and the AD Server.
Answer: D
Explanation:
The administrator should prevent the Files environment and the AD Server from having such a time difference in future by using the same NTP Servers for the File environment and the AD Server. NTP (Network Time Protocol) is a protocol that synchronizes the clocks of devices on a network with a reliable time source. NTP Servers are devices that provide accurate time information to other devices on a network. By using the same NTP Servers for the File environment and the AD Server, the administrator can ensure that they have consistent and accurate time settings and avoid any synchronization issues or errors. Reference: Nutanix Files Administration Guide, page 32; Nutanix Files Troubleshooting Guide
NEW QUESTION # 42
An administrator wants to monitor their Files environment for suspicious activities, such mass deletion or access denials.
How can the administrator be alerted to such activities?
How can the administrator be alerted to such activities?
- A. Deploy the Files Analytics VM. and configure anomaly rules.
- B. Configure Alerts & Events in the Files Console, filtering for Warning severity.
- C. Configure Files to use ICAP servers, with monitors for desired activities.
- D. Create a data protection policy in the Files view in Prism Central.
Answer: A
Explanation:
The administrator can monitor their Files environment for suspicious activities, such as mass deletion or access denials, by deploying the File Analytics VM and configuring anomaly rules. File Analytics is a feature that provides insights into the usage and activity of file data stored on Files. File Analytics consists of a File Analytics VM (FAVM) that runs on a Nutanix cluster and communicates with the File Server VMs (FSVMs) that host the file shares. File Analytics can alert the administrator when there is an unusual or suspicious activity on file data, such as mass deletion, encryption, permission change, or access denial. The administrator can configure anomaly rules to define the threshold, time window, and notification settings for each type of anomaly. Reference: Nutanix Files Administration Guide, page 93; Nutanix File Analytics User Guide
NEW QUESTION # 43
An administrator has received an alert AI60068 - ADSDuplicationIPDetected details of alert as follows:
Which error log should the administrator review to determine the related Duplicate IP address involved?
- A. Tcpkill.log
- B. Minerva.nvm.log
- C. Solver.log
- D. Minerva_cvm.log
Answer: D
Explanation:
The Minerva_cvm.log file contains information about the Minerva service, which is responsible for managing the FSVMs and their communication with Prism Central. The Minerva_cvm.log file can be used to troubleshoot issues related to Nutanix Files, such as duplicate IP address detection. The log file can be found in /home/nutanix/data/logs/minerva on any CVM in the cluster. Reference: Nutanix Support Portal - Troubleshooting Nutanix Files
NEW QUESTION # 44
Within the Prism Central Entity > Services > Objects menu option, what is the correct task order for creating an object storage?
Answer:
Explanation:
NEW QUESTION # 45
An administrator created a bucket for an upcoming project where internal users as well as an outside consultant .... Object Browser. The administrator needs to provide both internal and consultant access to the same bucket.
The organization would like to prevent internal access to the consultant, based on their security policy.
Which two items are requires to fulfill this requirement (Choose two.)
- A. Install third-party software for bucket access to all users.
- B. Generate access keys based on directory and email-based users.
- C. Configure Directory Services under the Access Keys section
- D. Generate access keys using third-party software.
Answer: B,C
Explanation:
Nutanix Objects supports directory services integration, which allows administrators to configure access keys based on directory and email-based users. This enables granular access control and security for buckets and objects. The administrator can configure directory services under the Access Keys section in Prism Central, and then generate access keys for internal users from the directory service and for the consultant from an email address2. Reference: Nutanix Objects Administration Guide2
NEW QUESTION # 46
......
Nutanix NCP-US-6.5 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
Get Prepared for Your NCP-US-6.5 Exam With Actual 78 Questions: https://testinsides.actualpdf.com/NCP-US-6.5-real-questions.html
