Pass IBM C1000-056 exam questions - convert Test Engine to PDF
Pass Your C1000-056 Exam Easily - Real C1000-056 Practice Dump Updated Feb 25, 2023
IBM C1000-056 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 22
Where are recorded messages sent by default in the flow exerciser?
- A. They are sent to the Recorded Messages item located in the navigator
- B. They are sent to the output node where each message was saved
- C. They are sent to the Message Flow icon in the Flow Exerciser toolbar
- D. They are sent to the input node where each message was saved
Answer: C
NEW QUESTION 23 
According to the API resource pictured above, there are three possible HTTP Return Codes: 400, 404, 200.
What is one way to set a HTTP Return code as 400 using ESQL?
- A. SET OutputLocalEnvironment.Destination.HTTP.ReplyStatusCode = 400;
- B. SET OutputLocalEnvironment.Reply.Transport.HTTP = 400;
- C. SET OutputLocalEnvironment.ReplyStatusCode = 400;
- D. SET OutputLocalEnvironment.REST.Reply.Transport.HTTP = 400;
Answer: A
NEW QUESTION 24
Which command creates basic user credentials to allow logging into the web user interface?
- A. mqsiwebuseradmin
- B. mqsiacldwebuseradmin
- C. mqsiuseradmin
- D. mqsiwebaceuseradmin
Answer: D
NEW QUESTION 25
The following flow is implemented in an online retailer's system to expose a web service that would process new orders then send shipping request(s) to the shipping carrier.
The shipping request messages should be put on a queue in the shipping carrier's secured SSL-enabled remote queue manager. What are two ways to set up the SSL connection to the remote queue manager?
- A. Create and configure an MQEndpoint policy to use SSL and attach it to the MQ Output node
- B. Check the "Use SSL" property in the MQ Output node properties
- C. Configure an SSL-enabled Security Identity by using the mqsisetdbparms command, then use that identity in the MQ Output node properties
- D. Check the "Use HTTPS" property in the MQ Output node
C Check the "Alternate User Authority" property in the MQ node
Answer: A
NEW QUESTION 26
Which two features of IBM App Connect Enterprise require IBM MQ to be installed?
- A. Collector nodes
- B. Assimilation
- C. Managed application support
- D. Timer nodes
- E. JMS messaging
Answer: A,D
NEW QUESTION 27
Where are recorded messages sent by default in the flow exerciser?
- A. They are sent to the Recorded Messages item located in the navigator
- B. They are sent to the Message Flow icon in the Flow Exerciser toolbar
- C. They are sent to the output node where each message was saved
- D. They are sent to the input node where each message was saved
Answer: C
NEW QUESTION 28
When referencing a policy within a node configuration, what is the format of the reference?
- A. {PolicyProjectName}:PolicyName
- B. PolicyProjectName:PolicyName
- C. ApplicationName:PolicyName
- D. Policy:{PolicyName}
Answer: A
NEW QUESTION 29
What is the maximum number of integration servers that can be used in a single server running IBM App Connect Enterprise?
- A. Up to 256
- B. Unlimited
- C. Up to 512
- D. Up to 128
Answer: B
Explanation:
Explanation
https://www.ibm.com/support/knowledgecenter/SSTTDS_11.0.0/com.ibm.etools.mft.doc/bn28100_.html
NEW QUESTION 30
What command must be executed before running the mqsicreatebroker command on Linux to create an integration node?
- A. mqsiprofile
- B. mqsicvp
- C. mqsicommandconsole
- D. mqsiservice
Answer: A
Explanation:
Explanation
https://www.ibm.com/support/knowledgecenter/SSTTDS_11.0.0/com.ibm.etools.mft.doc/ae12720_.html
NEW QUESTION 31
What is the correct order of steps to create an Integration Service from scratch?
Answer:
Explanation:
Explanation
To create an integration service by defining a new interface, complete the following steps:
* Open the New Integration Service wizard by using one of the following methods:
* Click File > New > Integration Service.
* In the Application Development view, click New > Start by creating an integration service.
* Right-click the white space of the Application Development view then click New > Integration Service.
* Enter a name for the integration service, and optionally a description.
* To specify how you want to define the interface for your integration service, select Define it myself using the integration service editor
* Specify where you want to store your interface definition.
* If the definition will be used by this integration service only, store the definition in the integration service project.
* If the definition might be used by multiple integration services, store the definition in a shared library.
Procedure
NEW QUESTION 32
How can static library LIB1 be converted into a shared library without breaking references?
- A. Create a new shared library named TMP1, move all assets from static library, rename the static library, and rename shared library LIB1.
- B. Use the shared library conversion tool from the Integration Toolkit
- C. Export static library LIB1 as a shared library, import new shared library into the workspace replacing static library with new shared LIB1.
- D. Highlight the static library, open convert wizard create a new shared library selecting the resolve references checkbox which will update all applications, libraries, and independent resources that referenced LIB1.
Answer: C
NEW QUESTION 33
What is the purpose of the mqsicreateworkdir command?
- A. It allows the creation of a new integration flow work directory
- B. It allows the creation of a new integration node work directory
- C. It allows the creation of a new integration server work directory
- D. It allows the creation of a new integration switch server work directory
Answer: C
Explanation:
Explanation
PurposeYou use the mqsicreateworkdir command to create a new directory to be used as an integration server's work directory.
https://www.ibm.com/support/knowledgecenter/en/SSTTDS_11.0.0/com.ibm.etools.mft.doc/createworkdircmd_
NEW QUESTION 34
The following flow receives order messages on an MQInput node then uses a Compute node to do some processing and sends MQ messages to two warehouses on two different queues.
The compute node routes the message to two MQOutput nodes connected through terminals Out1 and Out using the following ESQL expressions.
PROPAGATE TO TERMINAL 'out1; RETURN TRUE;
After deploying the flow, the solution developer noticed that the second queue always receives an empty message. To fix this issue, which ESQL expression lines should be used in the Compute node instead?
- A. PROPAGATE TO TERMINAL 'out1; PROPAGATE; RETURN FALSE;
- B. PROPAGATE TO TERMINAL 'out1; DELETE NONE-RETURN TRUE;
- C. PROPAGATE TO TERMINAL 'out; PROPAGATE TO TERMINAL 'out';
- D. RETURN TRUE DELETE NONE; RETURN TRUE;
Answer: A
NEW QUESTION 35
The mqsicommandconsole command is a required prerequisite for running which two commands?
- A. mqsiAssemblylnstall
- B. mqsichangeproperties
- C. mqsiprofille
- D. mqsisetsecurity
- E. mqsimanagelinlcs
Answer: A,D
Explanation:
Explanation
The mqsicommandconsole command is required for the following commands:
* mqsiaddbrokerinstance
* mqsicreatebroker
* mqsimigratecomponents
* mqsisetsecurity
* mqsiAssemblyInstall
* mqsimanagexalinks
* mqsipackagebar
https://www.ibm.com/support/knowledgecenter/SSMKHH_9.0.0/com.ibm.etools.mft.doc/bn13550_.htm
NEW QUESTION 36
What are the correct sequence of steps to define the operations in a service interface?
Answer:
Explanation:
* Open your integration service in the Service editor by double-clicking the Service Description in the Application Development view, or by right-clicking and selecting Open.
* Select the Interface tab to see the interface editor.
* By default, a request-response operation is created when the integration service is created. Click the operation name to edit it.
* Add or remove request-response operations and one-way operations by using the icons.
* Add or remove inputs, outputs, and faults to operations by using the icons. In the Properties tab, click the name and type of an input, output, or fault to edit it. You can create a new complex type for an input, output, or fault by clicking the type and selecting New....
NEW QUESTION 37
Once a BAR file is configured it can be deployed to which production environment?
- A. IBM App Connect on IBM Cloud
- B. IBM App Connect Professional
- C. IBM API Connect
- D. IBM App Connect Enterprise Developer Edition
Answer: A
Explanation:
Explanation
https://www.ibm.com/support/knowledgecenter/SSMKHH_10.0.0/com.ibm.etools.mft.doc/af03860_.htm
NEW QUESTION 38
The message flow security manager can be invoked by configuring a security enabled input node. The following diagram shows an example message flow and gives an overview of the sequence of events that occur when an input message is received by a security enabled input node in the message flow. Select the number that would interact with LDAP.
Answer:
Explanation:
Explanation
4
NEW QUESTION 39
The message flow security manager can be invoked by configuring a security enabled input node. The following diagram shows an example message flow and gives an overview of the sequence of events that occur when an input message is received by a security enabled input node in the message flow. Select the number that would interact with LDAP.
Answer:
Explanation:
Explanation
4
NEW QUESTION 40
What are two methods for configuring a Highly Available IBM App Connect Enterprise installation?
- A. Integration node clustering
- B. High Availability mode
- C. A Microsoft Cluster Server
- D. Network deployment mode
- E. Multi-instance integration nodes with IBM MQ
Answer: C,E
NEW QUESTION 41
Event-driven flows can be configured to run at regular intervals by adding which type of node in IBM App Connect Designer?
- A. Event
- B. Timer
- C. Execute
- D. Scheduler
Answer: A
NEW QUESTION 42
What are two attributes of IBM App Connect Enterprise JDBC pooled connections?
- A. A JDBC connection is created on demand for each message flow instance request
- B. A new JDBC connection is created if the maximum pool size has not been reached
- C. Each JDBC connection that is idle for 15 minutes is removed from the pool.
- D. Each JDBC connection that is associated with the message flow instance is maintained until the connection is closed.
- E. Each JDBC connection that is idle for 60 seconds is closed and is not associated with a message flow instance.
Answer: D,E
NEW QUESTION 43
How can an MQGet node be configured to read a message from a queue without deleting it?
- A. Set "Generate Mode" property to None
- B. Set "Copy Message" property to None
- C. Check the "Read Only" property
- D. Check the "Browse Only" property
Answer: D
NEW QUESTION 44
What is the correct order of prerequisite steps to install IBM App Connect Enterprise on IBM Cloud Private?
Answer:
Explanation:
NEW QUESTION 45
When developing RESTful APIs, what is the main purpose of the RESTAsyncRequest node?
- A. Allows a REST request to be issued to a REST API and return control to the flow without waiting for a response
- B. Allows a REST request to be issued to a SOAP API and return control to the flow without waiting for a response
- C. Allows a REST operation request to be exposed asynchronously and return control to the client without waiting for a response C Allows a REST operation request to be exposed asynchronously and return control to the flow without waiting for a response
Answer: A
Explanation:
Explanation
You can use a RESTAsyncRequest node in a message flow to issue a REST request to an external REST API, and return control to the flow without waiting for a response. The response is received by a RESTAsyncResponse node, which can be in a separate message flow but must be in the same integration server. The nodes are used as a pair, and correlate responses against the original requests by using a unique identifier, which is specified on both nodes.
https://www.ibm.com/support/knowledgecenter/SSMKHH_10.0.0/com.ibm.etools.mft.doc/bz90920_.html
NEW QUESTION 46
......
C1000-056 Real Exam Questions and Answers FREE: https://testinsides.actualpdf.com/C1000-056-real-questions.html
