[Mar-2023] Microsoft AZ-800 Test Engine PDF - All Free Dumps from ActualPDF
Get New AZ-800 Certification – Valid Exam Dumps Questions
NEW QUESTION 71
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains three Active Directory sites named Site1, Site2, and Site3. Each site contains two domain controllers. The sites are connected by using DEFAULTIPSITELINK.
You open a new branch office that contains only client computers. You need to ensure that the client computers in the new office are primarily authenticated by the domain controllers in Site1.
Solution: You configure the Try Next Closest Site Group Policy Object (GPO) setting in a GPO that is linked to Site1.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION 72
SIMULATION
You need to collect errors from the System event log of SRV1 to a Log Analytics workspace.
The required source files are located in a folder named \\dc1.contoso.com\install.
To complete this task, sign in the required computer or computers.
Answer:
Explanation:
NEW QUESTION 73
You have a Windows Server container host named Server1 and an Azure subscription.
You deploy an Azure container registry named Registry1 to the subscription.
On Server1, you create a container image named image1.
You need to store imager in Registry1.
Which command should you run on Server1 ? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/container-registry/container-registry-get-started-docker-cli?tabs=azure-cli#push-the-image-to-your-registry
NEW QUESTION 74
You need to implement a name resolution solution that meets the networking requirements. Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point
- A. Create an Azure private DNS zone named corp.fabhkam.com.
- B. Create an Azure DNS zone named corp.fabrikam.com.
- C. Create a virtual network link in the coip.fabnkam.com Azure private DNS zone.
- D. Configure a conditional forwarder on DC3.
- E. Configure the DNS Servers settings for Vnet1.
- F. Enable autoregistration in the corp.fabnkam.com Azure private DNS zone.
- G. On DC3, install the DNS Server role.
Answer: E,G
Explanation:
Virtual machines in an Azure virtual network receive their DNS configuration from the DNS settings configured on the virtual network. You need to configure the Azure virtual network to use DC3 as the DNS server. Then all virtual machines in the virtual network will use DC3 and their DNS server.
NEW QUESTION 75
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains a DNS server named Server1. Server1 hosts a DNS zone named fabrikam.com that was signed by DNSSEC.
You need to ensure that all the member servers in the domain perform DNSSEC validation for the fabrikam.com namespace.
What should you do?
- A. From a Group Policy Object (GPO). modify the Network List Manager policies.
- B. On Served, run the Add-DnsServerTrustAnchor cmdlet.
- C. From a Group Policy Object (GPO). add a rule to the Name Resolution Policy Table (NRPT).
- D. On each member server, run the Add-DnsServerTrustAnchor cmdlet.
Answer: C
NEW QUESTION 76
Hotspot Question
You plan to deploy an Azure virtual machine that will run Windows Server. The virtual machine will host an Active Directory Domain Services (AD DS) domain controller and a drive named F: on a new virtual disk.
You need to configure storage for the virtual machine. The solution must meet the following requirements:
- Maximize resiliency for AD DS.
- Prevent accidental data loss.
How should you configure the storage? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Box 1: F
Create a separate virtual data disk for storing the database, logs, and sysvol folder for Active Directory. Do not store these items on the same disk as the operating system.
Box 2: None
By default, data disks that are attached to a VM use write-through caching. However, this form of caching can conflict with the requirements of AD DS. For this reason, set the Host Cache Preference setting on the data disk to None.
Reference:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/identity/adds-extend- domain
NEW QUESTION 77
You have on-premises servers that run Windows Server as shown in the following table.
You have an Azure file share named share1 that stores two files named File2.docx and File3.docx.
You create an Azure File Sync sync group that includes the following endpoints:
share
D:\Folder1 on Server1
D:\Datal on Server2
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/storage/file-sync/file-sync-introduction
NEW QUESTION 78
Your network contains a multi -site Active Directory Domain Services (AD DS) foresl. Each Active Directory site is connected by using manually configured site links and automatically generated connections.
You need to minimize the convergence time for changes to Active Directory.
What should you do?
- A. Create a site link bridge that contains all the site links.
- B. For each site link, modify the site link costs.
- C. For each site link, modify the replication schedule.
- D. For each site link, modify the options attribute.
Answer: D
Explanation:
When you configure manual site link replication schedule is already setup to 15 minute replication cycle you can not lower more down. So only option left is to change link site option attribute for use notify setting.
NEW QUESTION 79
Which groups can you add lo Group3 and Groups? To answer, select the appropriate options in the answer are a. NOTE Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 80
You need to configure remote administration to meet the security requirements. What should you use?
- A. an Azure Bastion host
- B. Azure AD Privileged Identity Management (PIM)
- C. the Remote Desktop extension for Azure Cloud Services
- D. just in time (JIT) VM access
Answer: D
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/defender-for-cloud/just-in-time-access-usage?tabs=jit-config-asc%2Cjit-request-asc
NEW QUESTION 81
You have an Azure subscription named sub1 and 500 on-premises virtual machines that run Windows Server.
You plan to onboard the on-premises virtual machines to Azure Arc by running the Azure Arc deployment script You need to create an identity that mil be used by the script to authenticate access to sub1. The solution must use the principle of least privilege.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/azure-arc/servers/onboard-service-principal
NEW QUESTION 82
Your network contains two VLANs for client computers and one VLAN for a datacenter Each VLAN is assigned an IPv4 subnet Currently, all the client computers use static IP addresses.
You plan to deploy a DHCP server to the VLAN in the datacenter.
You need to use the DHCP server to provide IP configurations to all the client computers.
What is the minimum number of scopes and DHCP relays you should create? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 83
You need to sync files from an on-premises server named Server1 to Azure by using Azure File Sync You have a cloud tiering policy that is configured for 30 percent free space and 70 days.
Volume f on Server1 is 500 GB.
A year ago. you configured E:\Oata on Server1 to sync by using Azure File Sync. The files that are visible in E:\Data are shown in the following table.
Volume E does NOT contain any other files.
Where are File1 and flle3 located? To answer, select the appropriate options In the answer area.
Answer:
Explanation:
NEW QUESTION 84
You have on-premises file servers that run Windows Server as shown in the following table.
You have the Azure file shares shown in the following table.
You add a Storage Sync Service named Sync1 and an Azure File Sync sync group named Group1. Group1 uses share1 as a cloud endpoint.
You register Server1 and Server2 with Sync1. You add D:\Folder1 from Server1 as a server endpoint in Group1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/storage/file-sync/file-sync-planning
NEW QUESTION 85
Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains three domains. Each domain contains 10 domain controllers.
You plan to store a DNS zone in a custom Active Directory partition.
You need to create the Active Directory partition for the zone. The partition must replicate to only four of the domain controllers.
What should you use?
- A. New-ADobject
- B. Active Directory Administrative Center
- C. Active Directory Sites and Services
- D. ntdsutil.exe
Answer: D
NEW QUESTION 86
You have a server named Server1 that hosts Windows containers. You plan to deploy an application that will have multiple containers. Each container will be You need to create a Docker network that supports the deployment of the application. Which type of network should you create?
- A. I2bridge
- B. transparent
- C. NAT
- D. I2tunnel
Answer: A
NEW QUESTION 87
Case Study 2 - Contoso, Ltd
Overview
Contoso, Ltd. is a company that has a main office in Seattle and two branch offices in Los Angeles and Montreal.
Existing Environment
AD DS Environment
The network contains an on premises Active Directory Domain Services (AD DS) forest named contoso.com. The forest contains two domains named contoso.com and canada.contoso.com.
The forest contains the domain controllers shown in the following table.
All the domain controllers are global catalog servers.
Server infrastructure
The network contains the servers shown in the following table.
A server named Server4 runs Windows Server and is in a workgroup. Windows Firewall on Server4 uses the private profile.
Server2 hosts three virtual machines named VM1, VM2, and VM3.
VM3 is a file server that stores data in the volumes shown in the following table.
Group Policies
The contoso.com domain has the Group Policies Objects (GPOs) shown in the following table.
Existing Identities
The forest contains the users shown in the following table.
The forest contains the groups shown in the following table.
Current Problems
When an administrator signs in to the console of VM2 by using Virtual Machine Connection, and then disconnects from the session without signing out, another administrator can connect to the console session as the currently signed in user.
Requirements
Technical Requirements
Contoso identifies the following technical requirements:
Change the replication schedule for all site links to 30 minutes.
Promote Server1 to a domain controller in canada.contoso.com.
Install and authorize Server3 as a DHCP server.
Ensure that User1 can manage the membership of all the groups in Contoso\OU3.
Ensure that you can manage Server4 from Server1 by using PowerShell remoting.
Ensure that you can run virtual machines on VM1.
Force users to provide credentials when they connect to VM2.
On VM3, ensure that Data Deduplication on all volumes is possible.
Question
Hotspot Question
Which groups can you add to Group3 and Group5? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Group 3 = Group 1, 2 4 and 5 only. Domain-Local groups can contain members from the "forest".
Group 5 = Group 4 only. Global groups can only contain Users, Computers and Global groups from the "same" domain.
https://docs.microsoft.com/en-us/windows/security/identity-protection/access-control/active- directory-security-groups
NEW QUESTION 88
You have two servers that have the Hyper-V server role installed.
The servers are joined to a failover cluster both servers can connect to the same disk on an iSCSi storage device.
You plan to use the iSCSI storage to store highly available Hyper-V virtual machines that will support live migration functionality.
You need to configure a storage resource in the failover cluster to store the virtual machines.
What should you configure?
- A. Cluster Shared volumes (CSV)
- B. attributed File System (DFS) Replication
- C. a mirrored volume
- D. a storage pool
Answer: A
NEW QUESTION 89
Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains three Active Directory sites named Site1, Site2, and Site3. Each site contains two domain controllers. The sites are connected by using DEFAULTIPSITELINK.
You open a new branch office that contains only client computers.
You need to ensure that the client computers in the new office are primarily authenticated by the domain controllers in Site1.
Solution: You configure the Try Next Closest Site Group Policy Object (GPO) setting in a GPO that is linked to Site1.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION 90
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are planning the deployment of DNS to a new network.
You have three internal DNS servers as shown in the following table.
The contoso.local zone contains zone delegations for east.conloso.local and west.contoso.local. All the DNS servers use root hints.
You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and internet hosts.
Solution: On Server2 and Server3, you configure a conditional forwarder for contoso.local.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION 91
Which three actions should you perform in sequence to meet the security requirements for Webapp1? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Configure the IS application pool to run as Network Service.
2 - Create a group managed service account (gMSA) in Active Directory.
3 - Create the key Distribution Services (KDS) root key in AD DS.
NEW QUESTION 92
Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains three Active Directory sites named Site1, Site2, and Site3. Each site contains two domain controllers. The sites are connected by using DEFAULTIPSITELINK.
You open a new branch office that contains only client computers.
You need to ensure that the client computers in the new office are primarily authenticated by the domain controllers in Site1.
Solution: You configure the Try Next Closest Site Group Policy Object (GPO) setting in a GPO that is linked to Site1.
Does this meet the goal?
- A. No
- B. Yes
Answer: B
NEW QUESTION 93
......
Schedule exam
Languages: English, Japanese, Chinese (Simplified), Korean, German, French, Spanish, Portuguese (Brazil), Arabic (Saudi Arabia), Russian, Chinese (Traditional), Italian, Indonesian (Indonesia)
Retirement date: none
This exam measures your ability to accomplish the following technical tasks: deploy and manage Active Directory Domain Services (AD DS) in on-premises and cloud environments; manage Windows Servers and workloads in a hybrid environment; manage virtual machines and containers; implement and manage an on-premises and hybrid networking infrastructure; and manage storage and file services.
100% Passing Guarantee - Brilliant AZ-800 Exam Questions PDF: https://testinsides.actualpdf.com/AZ-800-real-questions.html
