Latest [Jul 22, 2023] Network Appliance NS0-162 Exam Practice Test To Gain Brilliante Result
Take a Leap Forward in Your Career by Earning Network Appliance NS0-162
NEW QUESTION # 43
You want to configure Active Directory domain controller access for NetApp ONTAP cluster administration. In this scenario, which two actions would accomplish this task? (Choose two.)
- A. Configure an authentication tunnel through an existing CIFS SVM.
- B. Configure an authentication tunnel through an admin SVM.
- C. Use the vservar active-directory create command to create a computer account on the domain for a non-CIFS SVM.
- D. Use the vserver active-directory create command to create a computer account on the domain for a CIFS SVM.
Answer: A,C
Explanation:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-adm-auth-rbac%2FGUID-BC7B1934-DDE6-4AFB-A319-6C85D1ADACB6.html
Configuring an authentication tunnel
If you have already configured a CIFS server for a data SVM, you can use the security login domain-tunnel create command to configure the SVM as a gateway, or tunnel, for AD access to the cluster.
Creating an SVM computer account on the domain
If you have not configured a CIFS server for a data SVM, you can use the vserver active-directory create command to create a computer account for the SVM on the domain.
NEW QUESTION # 44
Exhibit.
You have an SVM-DR relationship as shown in the exhibit. You are given a new requirement to use SnapMirror Synchronous (SMS) for the data volumes In NFS-SVM-01.
In this scenario, which solution Is supported to enable SMS in ONTAP 9.8 software?
- A. Set up new SM-S relationships from the FAS2720 to a new destination.
- B. Modify the existing SVM-DR policy to use sync mode.
- C. Set up new SM-S relationships from the AFF A220 to a new destination.
- D. Set up NetApp Cloud Sync with a cloud broker in AWS to replicate to a new destination.
Answer: D
NEW QUESTION # 45
Exhibit.
A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.
Referring to the exhibit, what is the problem?
- A. The logical Interface does not allow the NFSv3 protocol.
- B. The host IP address does not match the export policy rule.
- C. The volume is in read-only.
- D. The volume is not mounted In the namespace.
Answer: D
Explanation:
The volume is not mounted in the namespace. https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.cdot-famg-nfs%2FGUID-8E400D78-B405-4682-8F33-143783F2D580.html Even if the volume was read only it could be mounted - also the client IP is in the desired range and LIF is configured for NFS.
NEW QUESTION # 46
You have a 50 TO FlexGroup volume that is serving NFSv3 on a FAS8300 HA pair that Is running ONTAP 9.8 software of files. A Linux du command runs for days to count files.
In this scenario, which native ONTAP feature will report real-time file counts?
- A. volume autosize
- B. File System Analytics
- C. Quality of Service
- D. Logical Space Reporting
Answer: B
NEW QUESTION # 47
Click the Exhibit button.
Referring to the exhibit, what are two reasons why no initiators are displayed in the initiators' igroup screen? (Choose two.)
- A. SLM has not been enabled.
- B. Zoning on the switches has been done incorrectly.
- C. ALUA has not been enabled on the NetApp controllers.
- D. The server has not been powered up.
Answer: B,D
NEW QUESTION # 48
You are performing an ONTAP upgrade with an intercluster data protection SnapMirror relationship in this scenario, which two steps must be performed before an NDU? (Choose two.)
- A. The source cluster must be upgraded first.
- B. SnapMirror operations must be broken.
- C. The destination cluster must be upgraded first.
- D. SnapMirror operations must be suspended.
Answer: C,D
NEW QUESTION # 49
When you perform an upgrade using ONTAP System Manager 9.8, which two statements are true? (Choose two.)
- A. The images will be automatically uploaded to the cluster by using the ONTAP System Manager interface from the NetApp Support site.
- B. The latest available Images will appear In the ONTAP System Manager interface.
- C. The Images must be manually uploaded to the cluster by using the ONTAP System Manager interface.
- D. The update history is available within the ONTAP System Manager interface.
Answer: C,D
NEW QUESTION # 50
Your company has purchased two NetApp AFF A400 HA pairs. During deployment, how many root aggregates are created?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 51
Exhibit.
A user cannot save a file on an ONTAP SMB share.
Referring to the exhibit, which action allows the user to save the file?
- A. Synchronize the ONTAP Cluster time to the Active Directory time.
- B. Let the user save the file to a writeable location.
- C. Allow the file type, file In the CIFS Server policy.
- D. Set the user permission for the share to write.
Answer: B
NEW QUESTION # 52
You are asked to create a new SVM to serve SMB data using Active Directory authentication.
Which two requirements must be satisfied prior to serving data? (Choose two.)
- A. DNS must be enabled and configured correctly.
- B. The CIFS license must be installed on the storage system.
- C. An administrative user must be created for the SMB SVM.
- D. An intercluster LIF must be created for serving SMB data.
Answer: A,B
NEW QUESTION # 53
You want to create a new SVM for serving NFS data using the Storage Virtual Machine (SVM) Setup wizard.
In this scenario, which object is created automatically during the setup process?
- A. a data volume named after the SVM with the suffix_nfs_vol1
- B. a data aggregate named after the SVM with the suffix_nfs_aggr1
- C. an export policy named after the SVM with the suffix_nfs_exp1
- D. a data LIF named after the SVM with the suffix_nfs_lif
Answer: D
NEW QUESTION # 54
Your ONTAP cluster serves data and backup traffic running on the same physical port. You must isolate backup traffic from your production network traffic.
Which two actions must be performed to accomplish this task? (Choose two.)
- A. Create a namespace.
- B. Create IPspaces.
- C. Create a broadcast domain.
- D. Create a VLAN.
Answer: C,D
NEW QUESTION # 55
You need to Increase the number of files that can be created In a volume. Which two methods enable you to achieve this goal? (Choose two.)
- A. Increase the size of the volume.
- B. Increase the number of files permitted on the volume.
- C. Set the fractional reserve to "0".
- D. Set the space guarantee to 'volume".
Answer: A,B
NEW QUESTION # 56
The source NAS volume of a SnapMirror relationship is unavailable due to networking issues at your organization's primary data center. You want to make the destination NAS volume writable so that clients are able to access their data.
Which two steps do you need to take to solve the issue? (Choose two.)
- A. Delete the SnapMirror relationship from the destination cluster.
- B. Use the volume mount command to mount the NAS volume In the NFS namespace.
- C. Break the SnapMirror relationship using the snapairrcr break command from the destination cluster.
- D. Break the SnapMirror relationship using the snapmirror break command from the source cluster.
Answer: B,C
NEW QUESTION # 57
Which two resources are managed by an SVM administrator? (Choose two.)
- A. Snapshot copies
- B. LUNs
- C. disks
- D. aggregates
Answer: A,B
NEW QUESTION # 58
Due to the increasing threat of ransomware, you must implement a secure and fast solution to recover files in your ONTAP cluster. The users should be able to recover their files from their Windows Desktop.
In this scenario, which two steps fulfill this requirement? (Choose two.)
- A. Ensure that there is a Snapshot copy schedule for every volume containing files.
- B. Ensure that the option to show previous versions on each share is activated.
- C. Ensure that the option to show previous versions on the SVM Is activated.
- D. Ensure that the option to copy a FlexClone of each volume containing files is activated.
Answer: A,D
NEW QUESTION # 59
Exhibit.
A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.
Referring to the exhibit, what is the problem?
- A. The logical Interface does not allow the NFSv3 protocol.
- B. The host IP address does not match the export policy rule.
- C. The volume is in read-only.
- D. The volume is not mounted In the namespace.
Answer: D
Explanation:
The volume is not mounted in the namespace. https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.cdot-famg-nfs%2FGUID-8E400D78-B405-4682-8F33-143783F2D580.html Even if the volume was read only it could be mounted - also the client IP is in the desired range and LIF is configured for NFS.
NEW QUESTION # 60
Exhibit
Referring to the exhibit, what is the maximum possible IOPS for the VOL_A volume?
- A. 2000 IOPS
- B. 100 IOPS
- C. 1000 IOPS
- D. 500 IOPS
Answer: D
NEW QUESTION # 61
Exhibit.
You have an SVM-DR relationship as shown in the exhibit. You are given a new requirement to use SnapMirror Synchronous (SMS) for the data volumes In NFS-SVM-01.
In this scenario, which solution Is supported to enable SMS in ONTAP 9.8 software?
- A. Set up new SM-S relationships from the FAS2720 to a new destination.
- B. Modify the existing SVM-DR policy to use sync mode.
- C. Set up new SM-S relationships from the AFF A220 to a new destination.
- D. Set up NetApp Cloud Sync with a cloud broker in AWS to replicate to a new destination.
Answer: D
NEW QUESTION # 62
You want to add SSDs to existing HDD aggregates.
Which NetApp tool helps you to validate how many SSDs would Improve performance?
- A. OnCommand Workflow Automation
- B. Automated Workload Analyzer
- C. ONTAP System Manager
- D. Active IQ Unified Manager
Answer: A
NEW QUESTION # 63
You are planning an installation of a new stack of shelves to an HA pair and need to locate empty SAS ports...
In this scenario, which tool would you use to accomplish this task remotely?
- A. ONTAP System Manager
- B. Interoperability Matrix Tool
- C. Active IQ Web site
- D. Hardware Universe
Answer: A
Explanation:
ONTAP System Manager is a web-based tool that is accessible from any web browser and can be used to manage and monitor the ONTAP system remotely. It has the ability to discover, inventory, and manage all connected equipment, including empty SAS ports. With the System Manager, you can view the available SAS ports and configure them accordingly.
NEW QUESTION # 64
You have a remote FlexCache storage device that is running on ONTAP Select 9.8 software. The cache origin volume Is on an FAS8700 that is running ONTAP 9.8 software. The WAN connection dropped, and the FlexCache volume is in disconnected mode.
In this scenario, which LIFs would you ping to troubleshoot the disconnect?
- A. cluster
- B. data
- C. management
- D. Intercluster
Answer: A
Explanation:
https://docs.netapp.com/ontap-9/topic/com.netapp.doc.pow-fc-mgmt/GUID-AE9CC59E-BE3B-4185-B018-E3F089CB53B0.html?cp=17_0_2
NEW QUESTION # 65
Which two storage efficiencies are enabled by default on NetApp AFF systems? (Choose two.)
- A. postprocess zero block detection
- B. Inline deduplication
- C. Inline compression
- D. postprocess compaction
Answer: A,B
NEW QUESTION # 66
You have an ESXI cluster with VMware VMFS LUNs on an AFF A400 system. After troubleshooting performance Issues, you determine that timeout best practices are not set on the hosts.
In this scenario, which NetApp tool would apply the best practice settings?
- A. SnapManager
- B. Virtual Storage Console (VSC)
- C. SAN Host Utilities
- D. SnapCenter Plug-in for VMware vSphere
Answer: B
NEW QUESTION # 67
......
Authentic Best resources for NS0-162 Online Practice Exam: https://testinsides.actualpdf.com/NS0-162-real-questions.html
