Authentic DES-1221 Dumps - Free PDF Questions to Pass [Q34-Q49]

Authentic DES-1221 Dumps - Free PDF Questions to Pass 

Guaranteed Accomplishment with Newest Feb-2022 FREE DES-1221

Sample Questions in Attempting Specialist – Implementation Engineer, PowerStore Solutions Version 1.0

1. When planning rack layout, why should base enclosures be grouped together?

• Power distribution requirements
• Ease of cable management
• Rack weight balance
• Hot aisle requirement

2. What does the remote replication Failover operation do?

• Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy
• Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state
• Fully synchronizes the source and destination data states and reverses the replication direction
• Fully synchronizes the source and destination data states and stops the current replication session

3. What describes the Import External Storage feature?

• A native network configuration feature of PowerStore that configures external Ethernet switching for PowerStore installation
• A feature external to PowerStore that orchestrates vMotion movement of virtual machines onto PowerStore X systems
• An external plugin feature for hosts to tune application workload IO on PowerStore NVMe based storage
• A native data migration feature of PowerStore that imports external block storage to PowerStore

4. What is the recommended Windows multi-pathing policy for block volumes on a PowerStore array?

• FailOver
• Least QueueDepth
• Round-Robin
• Least Weighted Paths

5. While configuring a Dell switch with PowerStore, what are the recommended license outputs from a show license status command?

• Status: Perpetual, Type: Open
• Status: Term-Based, Type: Unlimited
• Type: Perpetual, Status: Active
• Type: Term-Based, Status: Active

6. A protection policy with snapshot and replication rules is applied to a file system. What is the result?

• Both replication and snapshot rules get applied
• Replication rules get ignored and only snapshot rules get applied
• Snapshot rules get ignored and only replication rules get applied
• Applying the protection policy to the file system fails

7. Which IP addresses are required when adding an appliance to the cluster?

• Storage and NTP
• DNS and NTP
• Management and Storage
• Management and DNS

8. A storage administrator has configured the addition of a VNX2 as a remote system for migration. Which Import External Storage migration feature architectural components are now established?

• Data path and management control path to the source storage system
• Host Fibre Channel initiators are registered on the VNX2 storage system
• Host iSCSI initiators are registered on the VNX2 storage system
• Data path and management control path to the access host

9. What is a way to verify the data path connectivity between a source VNX2 storage system and the PowerStore system when configuring an import session?

• Verify host initiators on PowerStore Manager
• Review Server Manager MPIO properties
• Examine Fibre Channel zoning
• Use the VNX2 SP ping operation

10. What is the correct power up sequence for a PowerStore?

• What is the total number of NVRAM devices used in PowerStore 3000?
• Expansion Enclosure, 2. Base Enclosure
• Base Enclosure, 2. Expansion Enclosure
• Base Enclosure Node A, 2. Base Enclosure Node B, 3. Expansion Enclosure
• Base Enclosure Node B, 2. Base Enclosure Node A, 3. Expansion Enclosure

12. Which API does PowerStore use to communicate with ESXi server during vVols provisioning operation?

• SOAP
• VASA
• VAAI
• REST

13. What is a requirement for the Import External Storage migration feature?

• PowerStore Global Storage Discovery IP address must be configured
• PowerStore LACP bonded ports are tagged for replication
• Direct Fibre Channel connections between storage systems
• PowerPath host-based multipathing software

14. A PowerStore T cluster has 3 appliances. Users are unable to access NAS services. What might be the issue?

• NAS appliance failover is incorrectly configured
• Master appliance is off-line
• Resource balancer service has failed
• Trial license is expired

15. What are the IP requirements for ICW on PowerStore X and PowerStore T models?

• PowerStore T requires four management IP addresses and PowerStore X requires six management IP addresses
• PowerStore T requires seven storage IP addresses and PowerStore X requires three storage IP addresses
• PowerStore T requires five management IP addresses and PowerStore X requires six management IP addresses
• PowerStore T requires three storage IP addresses and PowerStore X requires five storage IP addresses

 

NEW QUESTION 34
You are a network administrator that needs to setup a Data switch model S5248F-ON to be used for PowerStore 7000T system Use the Simulator to:
1) Check the OS version and license status.
2) Set management IP address 172.17.57.10 subnet as 255.255.255.0 on chassis = 1, slot = 1, port = 10
3) Enable the port
4) Configure default route with gateway 192.168.1.254, NTP server 192.168.1.50
5) Enable RSTP with priority 4096
6) Commit and exit.

Answer:

Explanation:
check the answer below in explanation.
Explanation
Below are the exhibits solution for this simulation.

 

NEW QUESTION 35
Which type of network is used for storage migration between appliances?

• A. Inter-node network
• B. Intra-Cluster Management network
• C. Storage network
• D. Intra-Cluster Data network

Answer: B

 

NEW QUESTION 36
Which ports are recommended for use as the interconnect between the two Dell supplied Data Switches connected to PowerStore?

• A. Two 25 GbE
• B. Four 1 GbE
• C. Two 10 GigE
• D. Two 100 GigE

Answer: D

Explanation:
Reference:
https://www.delltechnologies.com/en-us/collaterals/unauth/white-papers/products/storage/h18241- dell-emc-powerstore-best-practices-guide.pdf (12)

 

NEW QUESTION 37
How many cables are required for minimum support for PowerStore T Front-End storage connectivity?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: B

Explanation:

 

NEW QUESTION 38
A PowerStore T cluster has 3 appliances. Users are unable to access NAS services. What might be the issue?

• A. Resource balancer service has failed
• B. Master appliance is off-line
• C. Trial license is expired
• D. NAS appliance failover is incorrectly configured

Answer: D

 

NEW QUESTION 39
What is the maximum number of snapshot rules per cluster?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

 

NEW QUESTION 40
What is the final configuration step when installing the ImportKit for a Windows host accessing VNX2 storage?

• A. Select the RSA key for configuring the control path HTTPS certificate
• B. Configure the network port and interface for the host data path
• C. Configure the network port and interface for the management control path
• D. Select the folder location on the host for the program installation

Answer: B

 

NEW QUESTION 41
What does a Storage Administrator need to consider about Resource Balance when assigning volumes?

• A. Whether the appliance is offline
  Appliance failure status
  Capacity utilization
• B. Whether the Cluster is offline
  Node failure status
  I/O utilization
• C. Whether the Node is offline
  Appliance failure status
  Node utilization
• D. Whether the appliance is online
  Appliance failure status
  Cluster utilization

Answer: A

 

NEW QUESTION 42
What describes the process used in the Import External Storage migration architecture?

• A. Orchestrator on PowerStore communicates over the control path to the host plugin and controls the multipathing active path to storage
• B. Plugin on PowerStore communicates over the data path to orchestrator on the host and controls the multipathing active path to storage
• C. Orchestrator on PowerStore communicates over the data path to the host plugin and controls the multipathing active path to storage
• D. Plugin on PowerStore communicates over the control path to orchestrator on the host and controls the multipathing active path to storage

Answer: B

Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/importing-external- storage-to-powerstore-overview?guid=guid-6fef77c4-d4c9-49c6-8de2-efd67aa52ca5

 

NEW QUESTION 43
An administrator is trying to set a performance policy while creating a Thin Clone of a volume group. Why is the option to set performance policy unavailable?

• A. Volumes in the volume group are not mapped to any hosts
• B. Performance policy can only be set on a Thin Clone volume
• C. No Volumes are added in the volume group
• D. Thin Clones cannot be created using a volume group

Answer: B

 

NEW QUESTION 44
You are a network administrator that needs to setup a Data switch model S5248F-ON to be used for PowerStore 7000T system Use the Simulator to:
1) Check the OS version and license status.
2) Set management IP address 172.17.57.10 subnet as 255.255.255.0 on chassis = 1, slot = 1, port = 10
3) Enable the port
4) Configure default route with gateway 192.168.1.254, NTP server 192.168.1.50
5) Enable RSTP with priority 4096
6) Commit and exit.

Answer:

Explanation:
Below are the exhibits solution for this simulation.

 

NEW QUESTION 45
How is the VASA provider registered with vSphere when connecting to a PowerStore X system?

• A. Manually added from vCenter server using add storage provider option
• B. VASA is unsupported in PowerStore X models
• C. Built into the PowerStore X system code
• D. Automatically added during Initial Configuration

Answer: D

Explanation:
Reference:
https://www.delltechnologies.com/en-ca/collaterals/unauth/white-papers/products/storage/h18116- dell-emc-powerstore-vmware-vsphere-best-practices.pdf (17)

 

NEW QUESTION 46
Which type of network is used for storage migration between appliances?

• A. Inter-node network
• B. Intra-Cluster Management network
• C. Storage network
• D. Intra-Cluster Data network

Answer: B

Explanation:
Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-ntwk-plang/powerstore-t-model- appliance-networks?guid=guid-97a3e988-c1bc-4f51-a445-3af23f19da1b&lang=en-us

 

NEW QUESTION 47
Refer to the Exhibit.

What happens to the parent resource of thin clone 3 if thin clone 2 is deleted?

• A. Thin clone 3 has an empty parent
• B. Thin clone 1 becomes parent
• C. Snapshot 3 becomes the parent
• D. Thin clone 3 becomes parent

Answer: A

 

NEW QUESTION 48
An administrator is trying to set a performance policy while creating a Thin Clone of a volume group. Why is the option to set performance policy unavailable?

• A. Volumes in the volume group are not mapped to any hosts
• B. Performance policy can only be set on a Thin Clone volume
• C. No Volumes are added in the volume group
• D. Thin Clones cannot be created using a volume group

Answer: B

Explanation:
Reference:
https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-cfg-vols/remove-a-volume-from-a- volume-group?guid=guid-4b974223-26e4-40fe-a1b8-01beb210c305&lang=en-us

 

NEW QUESTION 49
......

DES-1221 Braindumps PDF, EMC DES-1221 Exam Cram: https://testinsides.actualpdf.com/DES-1221-real-questions.html