[2023] Pass Pure Storage FBAP_002 Exam in First Attempt Easily
The Most Efficient FBAP_002 Pdf Dumps For Assured Success
NEW QUESTION # 29
A developer of a business-critical application is concerned about system reliability when it comes to a IO resistance. An architect needs to explain the FlashBlade write mechanism and address three main concerns:
-Data location when FlashBlade acknowledge a write
-Number of created data copies before FlashBlade acknowledges a write
-Blade failure resilience
When does write acknowledgement happen?
- A. When data is written NvRAM on three different blades.
- B. When data is written onto Flash. ***
- C. When data is written NvRAM on two different blades.
- D. When data is written NvRAM on a super capacitor.
Answer: B
NEW QUESTION # 30
A customer wants to leverage FlashBlade to create a DataHub. Which set of applications will co-exist on a FlashBlade DataHub?
- A. AI/ML, Kafka, Spark, Oracle OLTP, SAP
- B. CommVault, Veeam, NetBackup, VDI, SAP
- C. Oracle OLTP, Elastic Search, Kafka, Spark, Veeam
- D. SAS, Elastic Search, Kafka, Spark, Veeam ***
Answer: D
NEW QUESTION # 31 
A customer has 10x52TB blades for 328TB and 10GB/s for read performance. How much space will the customer have if 1 blade failure occurs?
- A. 285TB***
- B. 328TB
- C. 241TB
- D. 306TB
Answer: A
NEW QUESTION # 32 
An NFS-only environment is designed from the environment diagram shown. During a Proof-of-Concept installation, the customer decides to add 2 clients writing 300MB/s and 1 client reading 1GBs. What does the architect need to do?
- A. Create a second data VIP
- B. Enable QoS on the network
- C. Add 1 blade ***
- D. Add 2 more 1Gb/s links to the FlashBlade
Answer: C
NEW QUESTION # 33 
An architect need to create capacity sizing of FlashBlade to move data from a 6-year old EMC-Dell Isilon. The current Isilon solution consumes almost 1.3PB. There are three workloads:
-Warehouse application (40 TB, estimated compression ratio 2:1, IO size 8K)
-Images (20 TB, estimated compression ratio 1.0:1 average image size 1M)
-Log files (40 TB, estimated compression ratio 4:1, average file size 4k) What is the required FlashBlade configuration?
- A. 42x52TB blades
- B. 15x52TB blades
- C. 15x17TB blades
- D. 7x17TB blades ***
Answer: D
NEW QUESTION # 34
A FlashBlade is designed with a properly implemented single 4x40Gb/s LAG.
During implementation, the architect is informed that the ISL on the uplink switches in broken. The customer has no budget to repair or replace it. What should the architect do?
- A. Using the same LAG, create a second subnet and VIP.
- B. Remove all uplink from FM2.
- C. Divide the single LAG into one LAG per switch. ***
- D. Change out the 40Gb/s cable for breakout cable.
Answer: C
NEW QUESTION # 35
A customer has multiple FlashBlades and reports performance issues that occurred in the past 24 hours.
Where should the architect go to identify the issue?
- A. Performance view under Analytic ***
- B. Dashboard view
- C. Expanded Card View under Appliances
- D. Alerts view under Messages
Answer: A
NEW QUESTION # 36
Which of the following benefits does FlashBlade SafeMode offer?
- A. Protects snapshots from being overwritten.
- B. Prevents the unauthorized deletion of snapshots.
- C. Eradicates deleted snapshots immediately.
- D. Protects against unauthorized eradication of snapshots ***
Answer: D
NEW QUESTION # 37
A customer has a 7x52TB system and reports poor workload performance.
The customer provides the following information:
1.The customer has 4 host connecting using NFS.
2.The environment is running VMware with 300 VMs.
3.The FlashBlade is connected to the customer network using 4x40Gb/s links What is causing this issue?
- A. The environment does NOT have properly configured jumbo frames.
- B. The customer must configure and optimal I/O size for the file system.
- C. The customer must buy more blade to improve performance. ***
- D. The environment does NOT have enough concurrency to the FlashBlade.
Answer: C
NEW QUESTION # 38
A customer is architecting a new distributed application in their datacenter.
Which network device should be used for optimal network performance?
- A. Hub
- B. Switch ***
- C. Router
- D. Firewall
Answer: B
NEW QUESTION # 39
A customer has an existing Flashblade with 13x52TB blades in a single-chassis configuration and needs more capacity for a new application coming online in the next few weeks. The architect has determined they need an additional four blades.
How many additional rack units are required to accommodate the new blades?
- A. 0
- B. 1
- C. 2
- D. 4 ***
Answer: D
NEW QUESTION # 40
A customer has a FlashBlade and wants to use it to store data for an application that runs on Linux. The FlashBlade has four Data VIPs and is connected with four 40Gbe links connected to the Top-of-Rack switch in a virtual port-channel with trunking enabled. The Linux host has a single 40Gbe NIC and is configured with a single mount point located at /mnt/appdata. nconnect is not enabled.
What is the maximum throughput the customer should expect when reading data from the mount point?
- A. Approximately 4GB/s
- B. Approximately 1GB/s
- C. Approximately 1Gb/s
- D. Approximately 40GB/s***
Answer: D
NEW QUESTION # 41
A customer is adding snapshot policies so that some file systems can be tiered based on importance to the business.
-1 file system with high priority
-3 file systems with medium priority
-2 file systems with low priority
How many snapshot policies does the customer need to protect all of their file systems?
- A. 0
- B. 1
- C. 2
- D. 3 ***
Answer: D
NEW QUESTION # 42
A customer has hundreds of TB of data that they need to archive for 20 years. The customer will need to completely destroy the data. They will only to access the data once or twice during the 20 years. The data is very sensitive. It would be a serious security breach if anyone accessed the data during that time. The customer is considering NAS.
Why should the architect recommend another solution?
- A. NAS will be to expensive compared to other satisfactory solution.
- B. NAS storage will make complete data destruction impossible.
- C. NAS will NOT meet the isolation and security requirements.
- D. NAS storage mediums will degrade too much during the required 20 year of archive. ***
Answer: D
NEW QUESTION # 43 
The customer is deploying FlashBlade on a ship with no immediate access to replacement part inventory. The customer needs at least 100TB of usable capacity at any time. The customer assumes worst case scenario in which FlashBlade can lose two blades between visting the next port where replacement can be shipped.
What is the recommend FlashBlade configuration?
- A. 11 blades
- B. 12 blades ***
- C. 10 blades
- D. 13 blades
Answer: B
NEW QUESTION # 44
A customer has an application that stores GIS data in an S3 repo. For compliance reasons, the GIS data that existed at a previous point in time may need to be accessed.
What should the architect do?
- A. Enable object versioning ***
- B. Take periodic snapshots
- C. Replicate the older objects
- D. Back up the GIS data regularly
Answer: A
NEW QUESTION # 45 
What are Port 31/32 on the XFMs reserved for?
- A. Customer Network
- B. Console
- C. FlashBlade Chassis
- D. Switch interconnectivity ***
Answer: D
NEW QUESTION # 46
A customer practices agile development, and they are having performance issues with builds of the most actively developed software suite as they attempt additional concurrent builds. What is causing the issue?
- A. Latency between the compilation server and the legacy storage. ***
- B. Legacy storage does NOT have enough uplinks.
- C. Locking of shared library files during compilations.
- D. Jumbo frames are NOT configured correctly.
Answer: A
NEW QUESTION # 47
......
We offers you the latest free online FBAP_002 dumps to practice: https://testinsides.actualpdf.com/FBAP_002-real-questions.html
