[2022] Use Real Network Appliance Dumps - 100% Free NS0-194 Exam Dumps
Realistic NS0-194 Dumps Latest Network Appliance Practice Tests Dumps
NetApp NS0-194 Exam Topics:
| Section | Objectives |
|---|---|
| Active IQ | -Describe how to use Active IQ |
| NetApp Hardware | -Identify the FRUs in a NetApp system -Demonstrate knowledge of the hardware replacement process -Describe storage hardware technology -Describe compute technology |
| Data Protection | -Identify data protection concepts -Demonstrate knowledge of data protection operations |
| ONTAP OS | -Describe disk or aggregate concepts -Describe volume concepts -Describe ONTAP networking concepts -Describe how ONTAP interacts with external components -Identify ONTAP logging mechanisms -Describe supported ONTAP protocols |
| Troubleshooting NetApp Hardware and Software | -Demonstrate knowledge of how to collect and analyze information -Demonstrate knowledge of how to troubleshoot data access problems -Demonstrate knowledge of how to analyze performance |
NEW QUESTION 54
You want to use the supported method to upgrade the ONTAP version of a Cloud Volumes ONTAP instance from ONTAP 9.5 to ONTAP 9.6.
In this scenario, which NetApp tool accomplishes this task?
- A. Active IQ Unified Manager
- B. Cloud Manager
- C. ONTAP System Manager
- D. Cloud Insights
Answer: C
NEW QUESTION 55
A customer with a small FAS2240-4 Data ONTAP 7-Mode 8.1.1 installation is having aggregate capacity problems.
When you requested the output of the aggr show_space command, the customer noticed from the output that A-SIS is using a lot of capacity and the customer is concerned.
In this scenario, what do you tell the customer?
- A. The A-SIS field from the command shows how much data was saved by deduplication on the aggregate.
- B. The A-SIS field from the command shows the number of duplicate blocks present in the aggregate that could be removed when deduplication is enabled on that aggregate.
- C. The A-SIS field from the command shows the amount of data that is actually on the aggregate before deduplication saved space on the aggregate.
- D. The A-SIS field from the command shows how much capacity is used on the aggregate for the deduplication fingerprint database.
Answer: B
NEW QUESTION 56
Exhibit:
A customer receives the AutoSupport message shown below.
''(?] Sat Aug 23 13:00:27 PDT [hostname: env_rngr: callhome.c.fan.fru.fault:error] :
Call home for CHASSIS FAN FRU FAILED: SysFan3 F2 (?] Sat Aug 23 13:00:32
PDT [hostname: env_mgr: monitor.chassisFan.ok:notice]: Chassis fan Sysfan3 F2 is ok"
The output of the sysconfig -a command is shown in the exhibit.
In this scenario, what would you do to solve this problem?
- A. Replace the fan.
- B. Disconnect the controller from the mains, wait two minutes, and re-connect it in the next maintenance window.
- C. Update the Service Processor firmware.
- D. Update Data ONTAP to 8.1.4 at the latest patch level.
Answer: D
NEW QUESTION 57
Exhibit:
You are provided output from the sysconfig -a and sysconfig -r commands of a MetroCluster cluster for disk switch 1:15.45 SN#J9YG1U3L, as shown In the exhibit.
Which two statements are true in this scenario? (Choose two.)
- A. The disk is located in switch3.
- B. The disk is in shelf 2 bay 13.
- C. The disk is located at the file3 site.
- D. The disk is located at the file2 site.
Answer: B,C
NEW QUESTION 58
After a recent unplanned power outage at the site, the power has been restored and you notice power supply fault messages in the event management system (EMS) log or fault lights on the storage shelves.
Which command would you use to collect information about the problem?
- A. storage show fault -v
- B. storage show fault
- C. sysconfig -a
- D. system node environment sensors show
Answer: A
NEW QUESTION 59
You have installed and configured SnapDrive for Windows on a Windows server. Using SnapDrive, you successfully created two LUNs that are connected to the same storage controller using iSCSI.
You later realize that Snap Drive is no longer enumerating one of the disks. In this scenario, what would be a symptom of this problem?
- A. The SnapDrive service is not running.
- B. The SnapDrive service account user is a local administrator on the Windows server.
- C. There is a Snapshot copy mounted to the Windows server in a (busy,LUN) state.
- D. The disk does not appear In Disk Management.
Answer: C
NEW QUESTION 60
A customer must store physical hard copies of transaction data off site to meet regulatory requirements.
Which NetApp technology enables the customer to accomplish this task?
- A. SnapVault
- B. FlexCache
- C. SVM DR
- D. NDMP
Answer: A
NEW QUESTION 61
A customer recently had a controller module failure on a FAS62xx system running clustered Data ONTAP 8.3.1.
The controller module had been replaced last night and everything is working well but the customer noticed warnings concerning licensing on the console. The warnings say there is a grace period of 89 days remaining.
In this scenario, what should be done to solve this problem?
- A. Apply the previously used license keys using the appropriate commands.
- B. Execute a system restore to recover the previous license keys, and then apply to the new controller module.
- C. Obtain new 8.2x format license keys and install them using the appropriate commands.
- D. Collect the new license keys from the new controller module packaging and install them using the appropriate commands.
Answer: C
NEW QUESTION 62
Snap Drive for Windows has been installed and configured on a VMware virtual machine. The virtual machine has been configured with raw device mappings (RDMs) that are mapped to LUNs on a NetApp storage controller.
The RDMs can be seen as connected disks in Windows Disk Management.
However, Snap Drive is not enumerating the RDMs.
Which action will solve the problem in this scenario?
- A. Snap Drive must be installed on tin* VhtualCenter server.
- B. Virtual Center or ESX servor logon settings must bo enabled and configured.
- C. Snap Drive must have the preferred storage IP addresses configured.
- D. Snap Drive and Virtual Storage Console (VSC) integration must be configured.
Answer: D
NEW QUESTION 63
What are two conditions that would cause writes in memory to be written to disk? (Choose two.)
- A. Drive capacity becomes available.
- B. The NVRAM (NVLog) fills up.
- C. A Snapshot copy is taken.
- D. A user presses "Save".
Answer: B,D
NEW QUESTION 64
Which version of Data ONTAP would disable access to FilerView in favor of using OnCommand Manager for management?
- A. 8.1
- B. 7.3
- C. 8.0
- D. 8.2
Answer: A
NEW QUESTION 65
A customer ordered a FAS2720 cluster with 8 TB SATA drives. The customer wants to use the Advanced Drive Partitioning (ADP) feature to avoid consuming the high capacity drives for the root aggregate. Before you use the cluster setup, you issue the aggr status command and notice that ADP is not being used.
In this scenario, what would you use to implement ADP?
- A. special boot menu
- B. SP prompt
- C. nodeshell
- D. loader prompt
Answer: D
NEW QUESTION 66
You are asked to replicate 15 of 20 volumes and the network configuration of your storage virtual machine to your other data center.
In this scenario, which NetApp technology should you use?
- A. SVM peering
- B. MetroCluster
- C. SnapMirror Synchronous
- D. SVM DR
Answer: C
NEW QUESTION 67
You have a 4-node MetroCluster system. A node needs to be taken down for maintenance, but all data needs to remain online.
In this scenario, what should you do to bring down a single node?
- A. Perform an aggregate relocation of the CFO aggregates on the node.
- B. Perform a MetroCluster switchover.
- C. Perform an HA takeover of the node.
- D. Disable HA on each side of the MetroCluster.
Answer: C
NEW QUESTION 68
You have an aggregate with 10 TB of free space. You create a 5 TB volume with space-guarantee set to none and fractional reserve set to 0. Inside the volume, you create a 100 GB space-reserved LUN.
In this scenario, how much free space is left in the aggregate?
- A. 5 TB
- B. 9.8 TB
- C. 9.9 TB
- D. 10 TB
Answer: C
NEW QUESTION 69
You replaced the controller of an HA pair in a 4-node cluster running clustered Data ONTAP 8.3.1. You have gone through all hardware testing requirements before booting the system.
Which action is now required to boot the system successfully?
- A. Use the disk reassign -s <souroe systemid> -d <destination systemid> command from maintenance mode.
- B. Use the storage disk reassign -s <source system id> -d <destination system id> command from diagnostics mode.
- C. Use the boot_ontap command from the loader prompt.
- D. Use the storage disk reassign -s <source system id> -d <destination system id> command from the cluster shell.
Answer: C
NEW QUESTION 70
You just deployed Unified Manager 6.x on a server running Red Hat. You attempt to log in to the UI with your Windows domain account but it fails.
Which two actions must be taken to solve this problem? (Choose two.)
- A. You must configure Red Hat for AD LDAP.
- B. You must configure Unified Manager for LDAP.
- C. You must add the user within Unified Manager.
- D. You must add the user within Red Hat.
Answer: B,C
NEW QUESTION 71
You are using AFF storage with the NVMe storage protocol on your Linux clients.
In this scenario, which NVMe feature must be present and enabled for the client to see storage failover happen?
- A. Multi-Path I/O (MPIO)
- B. Asymmetric Namespace Access (ANA)
- C. Asymmetric Logical Unit Access (ALUA)
- D. NVMe Qualified Name (NQN)
Answer: A
NEW QUESTION 72
......
NetApp NS0-194 Exam Certification Details:
| Recommended Training | Introduction to NetApp Storage System Basic Components (WBT) Introduction to Clustered Data ONTAP Architecture (WBT) Introduction to Aggregates and FlexVols in Clustered Data ONTAP (WBT) Introduction to Networking in Clustered Data ONTAP (WBT) Introduction to High-Availability in Clustered Data ONTAP (WBT) Introduction to Data Protection in Clustered Data ONTAP (WBT) |
| Sample Questions | NetApp NS0-194 Sample Questions |
| Exam Code | NS0-194 NCSE |
| Number of Questions | 60 |
| Duration | 90 minutes |
| Exam Name | Support Engineer |
| Passing Score | 63% |
| Exam Price | $150 USD |
NS0-194 Dumps PDF - NS0-194 Real Exam Questions Answers: https://testinsides.actualpdf.com/NS0-194-real-questions.html
